When selecting specific brackets, please follow these steps:
Waterproofing is the top priority: If the roof waterproofing layer is thin or brittle, give preference to Ballast Mounting System or Angle Aluminum/ Triangular Bracket to avoid drilling holes that could damage the waterpr...
1. Principles for selecting supports for flat concrete roofs
A. Combining structural stability with waterproofing
Concrete flat roofs have a high load-bearing capacity, but their waterproofing layers are vulnerable. The support system should, as far as possible, avoid damaging the waterproof...
1. Choose a highly adaptable mounting system
Glazed tile roofs are typically pitched, and as the tiles have a smooth surface, traditional bolt-through mounting systems are difficult to install securely. It is therefore necessary to select a clamping or hook-type mounting system specifically des...
With the rapid surge in photovoltaic installations, the mounting bracket market is expanding at an astonishing pace. Zinc-aluminum-magnesium brackets, offering superior cost-effectiveness, are becoming the mainstream choice in the market.
1. Current Market Scale: Transitioning from “Qu...
Throughout the entire lifecycle of a solar power plant, the mounting system serves not only as a structural support but also as a critical component of carbon emissions management. Thanks to their unique material properties, zinc-aluminum-magnesium (Zn-Al-Mg) mounting systems are signifi...
Selection Guide: How to Choose the Most Suitable Mount
1. Core Parameter Comparison
Parameters
Parameters
Parameters
Coating thickness
200μm or more(equivalent to 5-10 times the thickness of a zinc coating)
40-60μm
Corrosion resistance lifespan
Over 25 years
15–20...
1. Core Revolution: From Traditional Rust Prevention to Chemical "Self-Healing"
The standout feature of zinc-aluminum-magnesium brackets lies in their "self-healing" capability at cuts and fractures—a property absent in conventional galvanized brackets.
Unveiling the Self-Healing M...
For material selection in photovoltaic carport support systems, it is recommended to follow the strategy of "environmental priority, structural safety, and cost-effectiveness." The following are specific material recommendations based on current industry standards and technical requirements:...
I. The Ultimate Challenge for High-Rise Roofs
Installing photovoltaic systems on high-rise buildings presents far more complex challenges than those encountered on ordinary villas or factory roofs:
Stringent Load Restrictions
Weight is critical: Roof structures in high-rise buildings are eng...
The rusting of brackets is typically not caused solely by "water splashing onto them," but rather by the combined effect of multiple factors:
1. Environmental Corrosion (Most Common Cause)
Roof-mounted brackets are more susceptible to environmental factors than ground-mounted ones.
Mois...
1. Core Attributes and Structural Characteristics
Aluminum Alloy Bracket
Primary Composition: Primarily composed of aluminum alloy grades such as 6063 and 6005, belonging to the Al-Mg-Si alloy series.
Density and Weight: Density approximately 2.70 g/cm³, weight per square meter approximat...
English
